source: git/doc/INSTALL_unix.texi @ 89ff33

@comment -*-texinfo-*-
@comment $Id: INSTALL_unix.texi,v 1.14 2001-03-02 13:09:13 Singular Exp $
@c FILE: INSTALL_unix.texi
@c PURPOSE: Installation instruction for Singular on  Unix 
@c

@ifclear VERSION
@include version.texi
@end ifclear

@ifclear singularmanual
@majorheading Unix installation instructions for @sc{Singular} version @value{VERSION}
@end ifclear

@ifclear UNAME
@set _UNAME <uname>
@end ifclear

@ifset UNAME
@include uname.texi
@end ifset

To install @sc{Singular} on a 
@ifset UNAME
@value{_UNAME}
@end ifset
@ifclear UNAME
Unix
@end ifclear
platform, you need the following two
archives: 
@table @code
@item Singular-@value{VERSION}-share.tar.gz 
contains architecture independent data like documentation and libraries
(alternatively, you may also download 
@code{Singular-@value{VERSION}-share.zip}).
@item Singular-@value{VERSION}-@value{_UNAME}.tar.gz
contains architecture dependent executables, like the @sc{Singular}
program.
@ifclear UNAME
@code{@value{_UNAME}} is a description of the processor and operating system
for which @sc{Singular} is compiled (e.g, @code{ix86-Linux}). Please contact us if
you can not find an appropriate architecture dependent archive.
@end ifclear
@end table

You can obtain these (and other) archives from
@display
@uref{ftp://www.mathematik.uni-kl.de/pub/Math/Singular}. 
@end display

@ifclear singularmanual
@strong{Important:} Please see 
@ifhtml
@uref{COPYING.html, COPYING}
@end ifhtml
@ifnothtml
the file COPYING contained in the distribution 
@end ifnothtml
for license
information on @sc{Singular}. In particular, notice that we only grant you
permission to use @sc{Singular} if you have registered yourself as a
@sc{Singular} user by sending email to @email{singular@@mathematik.uni-kl.de}
with the subject line (or, mail body) @code{register}.
@end ifclear

@heading To install SINGULAR

Make sure that you have approximately 12MByte of free disk space and follow
these steps.
@enumerate
@item
Simply change to the directory in which you wish to install
@sc{Singular} (usually wherever you install 3rd-party software):
@smallexample
cd /usr/local/  
@end smallexample

@sc{Singular} specific subdirectories will be created in such a way
that multiple versions and multiple architecture dependent files
of @sc{Singular} can peaceably coexist under the same @code{/usr/local/}
tree.


@item
Unpack the archives:
@smallexample
gzip -dc Singular-@value{VERSION}-@value{_UNAME}.tar.gz | tar -pxf -
gzip -dc Singular-@value{VERSION}-share.tar.gz | tar -pxf -
@end smallexample
If you have downloaded @code{Singular-@value{VERSION}-share.zip},
unpack with 
@smallexample
unzip -u Singular-@value{VERSION}-share.zip
@end smallexample

This creates the following 
@multitable @columnfractions .36 .64
@item (sub)directories
@tab  which contain
@item @code{Singular/@value{VERSION}/@value{_UNAME}} 
@tab @code{Singular} and @code{ESingular} programs
@item @code{Singular/@value{VERSION}/LIB}
@tab @sc{Singular} libraries (@code{*.lib} files)
@item @code{Singular/@value{VERSION}/emacs}
@tab files for the @sc{Singular} Emacs user interface
@item @code{Singular/@value{VERSION}/info}
@tab info files of @sc{Singular} manual
@item @code{Singular/@value{VERSION}/html}
@tab html files of @sc{Singular} manual
@item @code{Singular/@value{VERSION}/doc}
@tab miscellaneous documentation files
@item @code{Singular/@value{VERSION}/examples}
@tab @sc{Singular} examples (@code{*.sing} files)
@end multitable

For the executable to work, the directory layout must look pretty much
like this; the executable looks for "sibling" directories at run-time
to figure out where its @sc{Singular} libraries and on-line 
documentation files are.  These constraints on the local directory layout
are necessary to avoid having to hard-code pathnames into the
executables, or require that environment variables be set before
running the executable. In particular, you @strong{must not move or copy}
the @sc{Singular} executables to another place, but use soft-links
instead. 
@end enumerate 

The following steps are optional:

@itemize @bullet
@item
Arrange that typing @code{Singular} at the shell prompt starts up the
installed @sc{Singular} executable. 

If you have root permission, do:
@smallexample      
ln -s `pwd`/Singular/@value{VERSION}/@value{_UNAME}/Singular  /usr/local/bin/Singular-@value{VERSION}
ln -s `pwd`/Singular/@value{VERSION}/@value{_UNAME}/ESingular  /usr/local/bin/ESingular-@value{VERSION}
ln -s /usr/local/bin/Singular-@value{VERSION} /usr/local/bin/Singular
ln -s /usr/local/bin/ESingular-@value{VERSION} /usr/local/bin/ESingular
@end smallexample
        
Otherwise, append the directory
@code{`pwd`/Singular/@value{VERSION}/@value{_UNAME}/} to your @code{$PATH}
environment variable. For the @code{csh} (or, @code{tcsh}) shell do:
@smallexample
set path=(`pwd`/Singular/@value{VERSION}/@value{_UNAME} $path)
@end smallexample 
For the @code{bash} (or, @code{ksh}) shell do:
@smallexample  
export PATH=`pwd`/Singular/@value{VERSION}/@value{_UNAME}/:$PATH
@end smallexample

You also might want to adjust your personal start-up files
(@code{~/.cshrc} for @code{csh}, @code{~/.tcshrc} for @code{tcsh}, or
@code{~/.profile} for @code{bash}) accordingly, 
so that the @code{$PATH} variable is set automatically each time you login.

@strong{IMPORTANT:} Do @emph{never} move or copy the file 
@code{Singular/@value{VERSION}/@value{_UNAME}/Singular} to another
place, but use soft-links instead. 

@item
If you wish to use any of following features of
@sc{Singular}, make sure that the respective programs are installed on your system:

@multitable @columnfractions .5 .5
@item @strong{Feature} @tab @strong{Requires}
@item running @code{ESingular}, or @code{Singular} within Emacs
@tab @uref{http://www.fsf.org/software/emacs/emacs.html,,Emacs} version
20 or higher, or, @uref{http://www.xemacs.org,,Xemacs} version 20 or
higher

@item on-line @code{html} help
@tab @uref{http://www.netscape.com,,netscape} browser
@item on-line @code{info} help
@tab @uref{http://www.texinfo.org,,info}, or
@uref{http://math-www.uni-paderborn.de/~axel/tkinfo/,,tkinfo} texinfo browser programs
@item TAB completion and history mechanism of ASCII-terminal interface
@tab shared @uref{ftp://ftp.de.uu.net/pub/gnu/readline/,,readline}
library, i.e. @code{/usr/lib/libreadline.so}
@item visualization of curves and surfaces 
@tab
@uref{http://www.mathematik.uni-mainz.de/AlgebraischeGeometrie/surf/surf.shtml,,surf}
version 0.9 or higher (only available for Linux and Solaris).
@end multitable

You may download most of these programs from
@display
@uref{ftp://www.mathematik.uni-kl.de/pub/Math/Singular/utils/}.
@end display

@item Customize the on-line help system:

By default, on-line help is displayed in the @code{html} format using
the @code{netscape} program.

However, this behavior can be customized in several ways
using the @sc{Singular} commands @code{system("--browser",<browser>)}
and @code{system("--allow-net", 1)} (or, by starting up @sc{Singular}
with the respective command line options).

In particular, creating the file
@code{Singular/@value{VERSION}/LIB/.singularrc} and putting the
@sc{Singular} command
@smallexample
system("--allow-net", 1);
@end smallexample
in it, allows the on-line help system to fetch its @code{html} pages
from @uref{http://www.singular.uni-kl.de, Singular's WWW
home site} 
in case its local html pages are not found. That is, you may delete your
local html pages, after setting this option. 

See also 
@ifset singularmanual
@ref{The online help system}, @ref{Command line options}, and
@ref{Startup sequence},
@end ifset
@ifclear singularmanual
the sections @emph{The online help system}, @emph{Command line options}, and
@emph{Startup sequence} in the @sc{Singular} manual 
@end ifclear
for more details on customizing the on-line help system.

@item 
Add the line 
@smallexample
* Singular:(singular.hlp).     A system for polynomial computations
@end smallexample
to your system-wide @code{dir} file (usually @code{/usr/info/dir} or
@code{/usr/local/info/dir} and  copy or soft-link the file
@code{Singular/@value{VERSION}/info/singular.hlp} 
to the directory of your @code{dir} file. 
@*This assures that the
@sc{Singular} manual can be  accessed from stand-alone texinfo
browser programs such as @code{info} or @code{Emacs}.
@end itemize

@heading Troubleshooting

@itemize @bullet
@item General: @sc{Singular} can not find its libraries or on-line help
@enumerate
@item
Make sure that you have read and/or excute permission the files and
directories of the Singular distribution. If in doubt, @code{cd} to the
directory where you unpacked @sc{Singular}, and do (as root, if
necessary):
@smallexample
chmod +rX Singular 
@end smallexample 

@item
Start up @sc{Singular}, and issue the command @code{system("Singular");}.
If this does not return the correct and expanded location of the
@sc{Singular} executable, then you found a bug in @sc{Singular}, which we
ask you to report (see below).
@item
Check whether the directories containing the libraries and on-line help
files can be found by @sc{Singular}: If @code{$bindir} denotes the
directory where the @sc{Singular} executable resides, then @sc{Singular}
looks for library files as follows:    
@* (0) the current directory     
@* (1) all dirs of the environment variable SINGULARPATH
@* (2) @code{$bindir/LIB}
@* (3) @code{$bindir/../LIB}
@* (4) @code{/usr/local/Singular/@value{VERSION}/LIB}
@* (4) @code{/usr/local/Singular/LIB}
@* The on-line @code{info} files need to be at  @code{$bindir/../info} and the
@code{html} pages at @code{$bindir/../html}.
@end enumerate

You can inspect the found library and @code{info}/@code{html}
directories by starting up @sc{Singular} with the
@code{--version} option, or by issuing the @sc{Singular} command
@code{system("--version");}.

@item Under SuSE-Linux, @sc{ESingular} does not display a prompt:
@cindex SuSE, ESingular bug
@cindex ESingular, no prompt
@cindex bug, ESingular
This is due to the very restrictive access rights of @code{/dev/pty*} of 
the standard @uref{http:/www.suse.de,SuSE} distribution (starting from
version 6.3 on). As root, do one of the following: Either
@example
chmod 666 /dev/pty*
@end example
or,
@example
chmod g+s $(which emacs)
chgrp tty $(which emacs)
chmod g+s $(which xemacs)
chgrp tty $(which xemacs)
@end example
See also @uref{http://sdb.suse.de/sdb/de/html/ke_devpts-63.html} for
details.

@item For @code{HPUX} systems:
@*The /etc/termcap files which are pre-installed on these systems are
broken which leads to messages like
@example
Name collision between 9826 9836
@end example
when @sc{Singular} is started. To fix this, you can get fixed termcap
files from @uref{ftp://www.mathematik.uni-kl.de/pub/Math/Singular/utils} 
by downloading the files termcap-<uname-description> and either
replace your /etc/termcap file by the file found there, or view, and
redo the respective changes by @code{diff}'ing the downloaded and the
original file.

@item For @code{ix86-Linux} systems:
@*Due to some incompatibilities of shared libraries, the start-up of
@sc{Singular} might fail with messages like
@example
  Can not find shared library ...
@end example
To fix this, download and install
@code{Singular-@value{VERSION}-ix86-Linux-static.tar.gz}.

@item For @code{AIX} systems:
@*The default @code{info} program of the system is not GNU's texinfo 
browser which is used to display the on-line documentation in the
@code{info} format. Therefore, the distribution of the AIX executable
already contains the @code{info} browser program. 
If you remove this program, make sure that the GNU
@code{info} program is executed if you call '@code{info}' from your shell.

@item For any other troubles: 
@*Please send an email to @email{singular@@mathematik.uni-kl.de}
and include the header which is displayed by starting up @sc{Singular}
with the @code{-v} option, and a description of your machine (issue the
command @code{uname -a} on your shell) in your report.
@end itemize


@heading More information about @sc{Singular}: Comments, Questions, Bug Reports
More and up-to-date information about @sc{Singular} is always available
from
@display
@uref{http://www.singular.uni-kl.de}.
@end display
We very much welcome any comments, questions, and bug reports. Please
contact us at
@display
@email{singular@@mathematik.uni-kl.de}.
@end display

@ifclear singularmanual
GOOD LUCK and ENJOY!                         
Your @sc{Singular} team.
@end ifclear