source: git/dox/Doxyfile.latex.short @ f9e7fc

spielwiese
Last change on this file since f9e7fc was 341696, checked in by Hans Schönemann <hannes@…>, 14 years ago
Adding Id property to all files git-svn-id: file:///usr/local/Singular/svn/trunk@12231 2c84dea3-7e68-4137-9b89-c4e89433aadc
  • Property mode set to 100644
File size: 63.0 KB
Line 
1# $Id$
2# This is the Doxygen (1.5.9) configuration for LATEX without graphics
3# Read Doxygen FAQ in case of LATEX shortage of capacities.
4# Doxyfile 1.5.9
5
6# This file describes the settings to be used by the documentation system
7# doxygen (www.doxygen.org) for a project
8#
9# All text after a hash (#) is considered a comment and will be ignored
10# The format is:
11#       TAG = value [value, ...]
12# For lists items can also be appended using:
13#       TAG += value [value, ...]
14# Values that contain spaces should be placed between quotes (" ")
15
16#---------------------------------------------------------------------------
17# Project related configuration options
18#---------------------------------------------------------------------------
19
20# This tag specifies the encoding used for all characters in the config file
21# that follow. The default is UTF-8 which is also the encoding used for all
22# text before the first occurrence of this tag. Doxygen uses libiconv (or the
23# iconv built into libc) for the transcoding. See
24# http://www.gnu.org/software/libiconv for the list of possible encodings.
25
26DOXYFILE_ENCODING      = UTF-8
27
28# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
29# by quotes) that should identify the project.
30
31PROJECT_NAME           = Singular
32
33# The PROJECT_NUMBER tag can be used to enter a project or revision number.
34# This could be handy for archiving the generated documentation or
35# if some version control system is used.
36
37PROJECT_NUMBER         = $VERSION$
38
39# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
40# base path where the generated documentation will be put.
41# If a relative path is entered, it will be relative to the location
42# where doxygen was started. If left blank the current directory will be used.
43
44OUTPUT_DIRECTORY       =
45
46# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
47# 4096 sub-directories (in 2 levels) under the output directory of each output
48# format and will distribute the generated files over these directories.
49# Enabling this option can be useful when feeding doxygen a huge amount of
50# source files, where putting all generated files in the same directory would
51# otherwise cause performance problems for the file system.
52
53CREATE_SUBDIRS         = YES
54
55# The OUTPUT_LANGUAGE tag is used to specify the language in which all
56# documentation generated by doxygen is written. Doxygen will use this
57# information to generate all constant output in the proper language.
58# The default language is English, other supported languages are:
59# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
60# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
61# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
62# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
63# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
64# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
65
66OUTPUT_LANGUAGE        = English
67
68# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
69# include brief member descriptions after the members that are listed in
70# the file and class documentation (similar to JavaDoc).
71# Set to NO to disable this.
72
73BRIEF_MEMBER_DESC      = YES
74
75# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
76# the brief description of a member or function before the detailed description.
77# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
78# brief descriptions will be completely suppressed.
79
80REPEAT_BRIEF           = YES
81
82# This tag implements a quasi-intelligent brief description abbreviator
83# that is used to form the text in various listings. Each string
84# in this list, if found as the leading text of the brief description, will be
85# stripped from the text and the result after processing the whole list, is
86# used as the annotated text. Otherwise, the brief description is used as-is.
87# If left blank, the following values are used ("$name" is automatically
88# replaced with the name of the entity): "The $name class" "The $name widget"
89# "The $name file" "is" "provides" "specifies" "contains"
90# "represents" "a" "an" "the"
91
92ABBREVIATE_BRIEF       = "The $name class"  "The $name widget"  "The $name file" \
93                         is provides  specifies  contains   represents a an the
94
95# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
96# Doxygen will generate a detailed section even if there is only a brief
97# description.
98
99ALWAYS_DETAILED_SEC    = NO
100
101# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
102# inherited members of a class in the documentation of that class as if those
103# members were ordinary class members. Constructors, destructors and assignment
104# operators of the base classes will not be shown.
105
106INLINE_INHERITED_MEMB  = NO
107
108# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
109# path before files name in the file list and in the header files. If set
110# to NO the shortest path that makes the file name unique will be used.
111
112FULL_PATH_NAMES        = YES
113
114# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
115# can be used to strip a user-defined part of the path. Stripping is
116# only done if one of the specified strings matches the left-hand part of
117# the path. The tag can be used to show relative paths in the file list.
118# If left blank the directory from which doxygen is run is used as the
119# path to strip.
120
121STRIP_FROM_PATH        = ..
122
123# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
124# the path mentioned in the documentation of a class, which tells
125# the reader which header file to include in order to use a class.
126# If left blank only the name of the header file containing the class
127# definition is used. Otherwise one should specify the include paths that
128# are normally passed to the compiler using the -I flag.
129
130STRIP_FROM_INC_PATH    =
131
132# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
133# (but less readable) file names. This can be useful is your file systems
134# doesn't support long names like on DOS, Mac, or CD-ROM.
135
136SHORT_NAMES            = NO
137
138# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
139# will interpret the first line (until the first dot) of a JavaDoc-style
140# comment as the brief description. If set to NO, the JavaDoc
141# comments will behave just like regular Qt-style comments
142# (thus requiring an explicit @brief command for a brief description.)
143
144JAVADOC_AUTOBRIEF      = NO
145
146# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
147# interpret the first line (until the first dot) of a Qt-style
148# comment as the brief description. If set to NO, the comments
149# will behave just like regular Qt-style comments (thus requiring
150# an explicit \brief command for a brief description.)
151
152QT_AUTOBRIEF           = NO
153
154# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
155# treat a multi-line C++ special comment block (i.e. a block of //! or ///
156# comments) as a brief description. This used to be the default behaviour.
157# The new default is to treat a multi-line C++ comment block as a detailed
158# description. Set this tag to YES if you prefer the old behaviour instead.
159
160MULTILINE_CPP_IS_BRIEF = NO
161
162# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
163# member inherits the documentation from any documented member that it
164# re-implements.
165
166INHERIT_DOCS           = YES
167
168# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
169# a new page for each member. If set to NO, the documentation of a member will
170# be part of the file/class/namespace that contains it.
171
172SEPARATE_MEMBER_PAGES  = YES
173
174# The TAB_SIZE tag can be used to set the number of spaces in a tab.
175# Doxygen uses this value to replace tabs by spaces in code fragments.
176
177TAB_SIZE               = 2
178
179# This tag can be used to specify a number of aliases that acts
180# as commands in the documentation. An alias has the form "name=value".
181# For example adding "sideeffect=\par Side Effects:\n" will allow you to
182# put the command \sideeffect (or @sideeffect) in the documentation, which
183# will result in a user-defined paragraph with heading "Side Effects:".
184# You can put \n's in the value part of an alias to insert newlines.
185
186ALIASES                =
187
188# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
189# sources only. Doxygen will then generate output that is more tailored for C.
190# For instance, some of the names that are used will be different. The list
191# of all members will be omitted, etc.
192
193OPTIMIZE_OUTPUT_FOR_C  = YES
194
195# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
196# sources only. Doxygen will then generate output that is more tailored for
197# Java. For instance, namespaces will be presented as packages, qualified
198# scopes will look different, etc.
199
200OPTIMIZE_OUTPUT_JAVA   = NO
201
202# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
203# sources only. Doxygen will then generate output that is more tailored for
204# Fortran.
205
206OPTIMIZE_FOR_FORTRAN   = NO
207
208# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
209# sources. Doxygen will then generate output that is tailored for
210# VHDL.
211
212OPTIMIZE_OUTPUT_VHDL   = NO
213
214# Doxygen selects the parser to use depending on the extension of the files it parses.
215# With this tag you can assign which parser to use for a given extension.
216# Doxygen has a built-in mapping, but you can override or extend it using this tag.
217# The format is ext=language, where ext is a file extension, and language is one of
218# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
219# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
220# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
221# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
222
223EXTENSION_MAPPING      =
224
225# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
226# to include (a tag file for) the STL sources as input, then you should
227# set this tag to YES in order to let doxygen match functions declarations and
228# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
229# func(std::string) {}). This also make the inheritance and collaboration
230# diagrams that involve STL classes more complete and accurate.
231
232BUILTIN_STL_SUPPORT    = YES
233
234# If you use Microsoft's C++/CLI language, you should set this option to YES to
235# enable parsing support.
236
237CPP_CLI_SUPPORT        = NO
238
239# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
240# Doxygen will parse them like normal C++ but will assume all classes use public
241# instead of private inheritance when no explicit protection keyword is present.
242
243SIP_SUPPORT            = NO
244
245# For Microsoft's IDL there are propget and propput attributes to indicate getter
246# and setter methods for a property. Setting this option to YES (the default)
247# will make doxygen to replace the get and set methods by a property in the
248# documentation. This will only work if the methods are indeed getting or
249# setting a simple type. If this is not the case, or you want to show the
250# methods anyway, you should set this option to NO.
251
252IDL_PROPERTY_SUPPORT   = NO
253
254# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
255# tag is set to YES, then doxygen will reuse the documentation of the first
256# member in the group (if any) for the other members of the group. By default
257# all members of a group must be documented explicitly.
258
259DISTRIBUTE_GROUP_DOC   = YES
260
261# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
262# the same type (for instance a group of public functions) to be put as a
263# subgroup of that type (e.g. under the Public Functions section). Set it to
264# NO to prevent subgrouping. Alternatively, this can be done per class using
265# the \nosubgrouping command.
266
267SUBGROUPING            = YES
268
269# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
270# is documented as struct, union, or enum with the name of the typedef. So
271# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
272# with name TypeT. When disabled the typedef will appear as a member of a file,
273# namespace, or class. And the struct will be named TypeS. This can typically
274# be useful for C code in case the coding convention dictates that all compound
275# types are typedef'ed and only the typedef is referenced, never the tag name.
276
277TYPEDEF_HIDES_STRUCT   = NO
278
279# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
280# determine which symbols to keep in memory and which to flush to disk.
281# When the cache is full, less often used symbols will be written to disk.
282# For small to medium size projects (<1000 input files) the default value is
283# probably good enough. For larger projects a too small cache size can cause
284# doxygen to be busy swapping symbols to and from disk most of the time
285# causing a significant performance penality.
286# If the system has enough physical memory increasing the cache will improve the
287# performance by keeping more symbols in memory. Note that the value works on
288# a logarithmic scale so increasing the size by one will rougly double the
289# memory usage. The cache size is given by this formula:
290# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
291# corresponding to a cache size of 2^16 = 65536 symbols
292
293SYMBOL_CACHE_SIZE      = 0
294
295#---------------------------------------------------------------------------
296# Build related configuration options
297#---------------------------------------------------------------------------
298
299# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
300# documentation are documented, even if no documentation was available.
301# Private class members and static file members will be hidden unless
302# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
303
304EXTRACT_ALL            = YES
305
306# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
307# will be included in the documentation.
308
309EXTRACT_PRIVATE        = YES
310
311# If the EXTRACT_STATIC tag is set to YES all static members of a file
312# will be included in the documentation.
313
314EXTRACT_STATIC         = YES
315
316# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
317# defined locally in source files will be included in the documentation.
318# If set to NO only classes defined in header files are included.
319
320EXTRACT_LOCAL_CLASSES  = YES
321
322# This flag is only useful for Objective-C code. When set to YES local
323# methods, which are defined in the implementation section but not in
324# the interface are included in the documentation.
325# If set to NO (the default) only methods in the interface are included.
326
327EXTRACT_LOCAL_METHODS  = YES
328
329# If this flag is set to YES, the members of anonymous namespaces will be
330# extracted and appear in the documentation as a namespace called
331# 'anonymous_namespace{file}', where file will be replaced with the base
332# name of the file that contains the anonymous namespace. By default
333# anonymous namespace are hidden.
334
335EXTRACT_ANON_NSPACES   = YES
336
337# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
338# undocumented members of documented classes, files or namespaces.
339# If set to NO (the default) these members will be included in the
340# various overviews, but no documentation section is generated.
341# This option has no effect if EXTRACT_ALL is enabled.
342
343HIDE_UNDOC_MEMBERS     = NO
344
345# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
346# undocumented classes that are normally visible in the class hierarchy.
347# If set to NO (the default) these classes will be included in the various
348# overviews. This option has no effect if EXTRACT_ALL is enabled.
349
350HIDE_UNDOC_CLASSES     = NO
351
352# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
353# friend (class|struct|union) declarations.
354# If set to NO (the default) these declarations will be included in the
355# documentation.
356
357HIDE_FRIEND_COMPOUNDS  = NO
358
359# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
360# documentation blocks found inside the body of a function.
361# If set to NO (the default) these blocks will be appended to the
362# function's detailed documentation block.
363
364HIDE_IN_BODY_DOCS      = NO
365
366# The INTERNAL_DOCS tag determines if documentation
367# that is typed after a \internal command is included. If the tag is set
368# to NO (the default) then the documentation will be excluded.
369# Set it to YES to include the internal documentation.
370
371INTERNAL_DOCS          = YES
372
373# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
374# file names in lower-case letters. If set to YES upper-case letters are also
375# allowed. This is useful if you have classes or files whose names only differ
376# in case and if your file system supports case sensitive file names. Windows
377# and Mac users are advised to set this option to NO.
378
379CASE_SENSE_NAMES       = YES
380
381# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
382# will show members with their full class and namespace scopes in the
383# documentation. If set to YES the scope will be hidden.
384
385HIDE_SCOPE_NAMES       = NO
386
387# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
388# will put a list of the files that are included by a file in the documentation
389# of that file.
390
391SHOW_INCLUDE_FILES     = YES
392
393# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
394# is inserted in the documentation for inline members.
395
396INLINE_INFO            = YES
397
398# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
399# will sort the (detailed) documentation of file and class members
400# alphabetically by member name. If set to NO the members will appear in
401# declaration order.
402
403SORT_MEMBER_DOCS       = YES
404
405# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
406# brief documentation of file, namespace and class members alphabetically
407# by member name. If set to NO (the default) the members will appear in
408# declaration order.
409
410SORT_BRIEF_DOCS        = NO
411
412# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
413# hierarchy of group names into alphabetical order. If set to NO (the default)
414# the group names will appear in their defined order.
415
416SORT_GROUP_NAMES       = NO
417
418# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
419# sorted by fully-qualified names, including namespaces. If set to
420# NO (the default), the class list will be sorted only by class name,
421# not including the namespace part.
422# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
423# Note: This option applies only to the class list, not to the
424# alphabetical list.
425
426SORT_BY_SCOPE_NAME     = NO
427
428# The GENERATE_TODOLIST tag can be used to enable (YES) or
429# disable (NO) the todo list. This list is created by putting \todo
430# commands in the documentation.
431
432GENERATE_TODOLIST      = YES
433
434# The GENERATE_TESTLIST tag can be used to enable (YES) or
435# disable (NO) the test list. This list is created by putting \test
436# commands in the documentation.
437
438GENERATE_TESTLIST      = YES
439
440# The GENERATE_BUGLIST tag can be used to enable (YES) or
441# disable (NO) the bug list. This list is created by putting \bug
442# commands in the documentation.
443
444GENERATE_BUGLIST       = YES
445
446# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
447# disable (NO) the deprecated list. This list is created by putting
448# \deprecated commands in the documentation.
449
450GENERATE_DEPRECATEDLIST= YES
451
452# The ENABLED_SECTIONS tag can be used to enable conditional
453# documentation sections, marked by \if sectionname ... \endif.
454
455ENABLED_SECTIONS       =
456
457# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
458# the initial value of a variable or define consists of for it to appear in
459# the documentation. If the initializer consists of more lines than specified
460# here it will be hidden. Use a value of 0 to hide initializers completely.
461# The appearance of the initializer of individual variables and defines in the
462# documentation can be controlled using \showinitializer or \hideinitializer
463# command in the documentation regardless of this setting.
464
465MAX_INITIALIZER_LINES  = 40
466
467# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
468# at the bottom of the documentation of classes and structs. If set to YES the
469# list will mention the files that were used to generate the documentation.
470
471SHOW_USED_FILES        = YES
472
473# If the sources in your project are distributed over multiple directories
474# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
475# in the documentation. The default is NO.
476
477SHOW_DIRECTORIES       = YES
478
479# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
480# This will remove the Files entry from the Quick Index and from the
481# Folder Tree View (if specified). The default is YES.
482
483SHOW_FILES             = YES
484
485# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
486# Namespaces page.
487# This will remove the Namespaces entry from the Quick Index
488# and from the Folder Tree View (if specified). The default is YES.
489
490SHOW_NAMESPACES        = YES
491
492# The FILE_VERSION_FILTER tag can be used to specify a program or script that
493# doxygen should invoke to get the current version for each file (typically from
494# the version control system). Doxygen will invoke the program by executing (via
495# popen()) the command <command> <input-file>, where <command> is the value of
496# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
497# provided by doxygen. Whatever the program writes to standard output
498# is used as the file version. See the manual for examples.
499
500FILE_VERSION_FILTER    =
501
502# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
503# doxygen. The layout file controls the global structure of the generated output files
504# in an output format independent way. The create the layout file that represents
505# doxygen's defaults, run doxygen with the -l option. You can optionally specify a
506# file name after the option, if omitted DoxygenLayout.xml will be used as the name
507# of the layout file.
508
509LAYOUT_FILE            =
510
511#---------------------------------------------------------------------------
512# configuration options related to warning and progress messages
513#---------------------------------------------------------------------------
514
515# The QUIET tag can be used to turn on/off the messages that are generated
516# by doxygen. Possible values are YES and NO. If left blank NO is used.
517
518QUIET                  = NO
519
520# The WARNINGS tag can be used to turn on/off the warning messages that are
521# generated by doxygen. Possible values are YES and NO. If left blank
522# NO is used.
523
524WARNINGS               = YES
525
526# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
527# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
528# automatically be disabled.
529
530WARN_IF_UNDOCUMENTED   = NO
531
532# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
533# potential errors in the documentation, such as not documenting some
534# parameters in a documented function, or documenting parameters that
535# don't exist or using markup commands wrongly.
536
537WARN_IF_DOC_ERROR      = YES
538
539# This WARN_NO_PARAMDOC option can be abled to get warnings for
540# functions that are documented, but have no documentation for their parameters
541# or return value. If set to NO (the default) doxygen will only warn about
542# wrong or incomplete parameter documentation, but not about the absence of
543# documentation.
544
545WARN_NO_PARAMDOC       = NO
546
547# The WARN_FORMAT tag determines the format of the warning messages that
548# doxygen can produce. The string should contain the $file, $line, and $text
549# tags, which will be replaced by the file and line number from which the
550# warning originated and the warning text. Optionally the format may contain
551# $version, which will be replaced by the version of the file (if it could
552# be obtained via FILE_VERSION_FILTER)
553
554WARN_FORMAT            = "$file:$line: $text "
555
556# The WARN_LOGFILE tag can be used to specify a file to which warning
557# and error messages should be written. If left blank the output is written
558# to stderr.
559
560WARN_LOGFILE           = dox.latex.log
561
562#---------------------------------------------------------------------------
563# configuration options related to the input files
564#---------------------------------------------------------------------------
565
566# The INPUT tag can be used to specify the files and/or directories that contain
567# documented source files. You may enter file names like "myfile.cpp" or
568# directories like "/usr/src/myproject". Separate the files or directories
569# with spaces.
570
571INPUT                  =    \
572                         ../omalloc  ../svd  ../mpr  ../factory ../libfac  ../IntegerProgramming  ../ntl  ../MP \
573                        ../kernel \
574                        ../Singular
575
576
577# This tag can be used to specify the character encoding of the source files
578# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
579# also the default input encoding. Doxygen uses libiconv (or the iconv built
580# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
581# the list of possible encodings.
582
583INPUT_ENCODING         = UTF-8
584
585# If the value of the INPUT tag contains directories, you can use the
586# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
587# and *.h) to filter out the source-files in the directories. If left
588# blank the following patterns are tested:
589# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
590# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
591
592FILE_PATTERNS          = *.dox \
593                         *.h *.hh *.hxx *.hpp *.h++ *.H *.HH *.H++ \
594                         *.c *.cc *.cxx *.cpp *.c++ *.C *.CC *.C++
595
596# The RECURSIVE tag can be used to turn specify whether or not subdirectories
597# should be searched for input files as well. Possible values are YES and NO.
598# If left blank NO is used.
599
600RECURSIVE              = YES
601
602# The EXCLUDE tag can be used to specify files and/or directories that should
603# excluded from the INPUT source files. This way you can easily exclude a
604# subdirectory from a directory tree whose root is specified with the INPUT tag.
605
606
607EXCLUDE                = ../doc  ../Tst   ../emacs  ../singular_usr     ../Singular/LIB   ../Singular/Examples ../Singular++ \
608                         CVS
609
610# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
611# directories that are symbolic links (a Unix filesystem feature) are excluded
612# from the input.
613
614EXCLUDE_SYMLINKS       = NO
615
616# If the value of the INPUT tag contains directories, you can use the
617# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
618# certain files from those directories. Note that the wildcards are matched
619# against the file with absolute path, so to exclude all test directories
620# for example use the pattern */test/*
621
622EXCLUDE_PATTERNS       =
623
624# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
625# (namespaces, classes, functions, etc.) that should be excluded from the
626# output. The symbol name can be a fully qualified name, a word, or if the
627# wildcard * is used, a substring. Examples: ANamespace, AClass,
628# AClass::ANamespace, ANamespace::*Test
629
630EXCLUDE_SYMBOLS        =
631
632# The EXAMPLE_PATH tag can be used to specify one or more files or
633# directories that contain example code fragments that are included (see
634# the \include command).
635
636EXAMPLE_PATH           =
637
638# If the value of the EXAMPLE_PATH tag contains directories, you can use the
639# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
640# and *.h) to filter out the source-files in the directories. If left
641# blank all files are included.
642
643EXAMPLE_PATTERNS       =
644
645# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
646# searched for input files to be used with the \include or \dontinclude
647# commands irrespective of the value of the RECURSIVE tag.
648# Possible values are YES and NO. If left blank NO is used.
649
650EXAMPLE_RECURSIVE      = NO
651
652# The IMAGE_PATH tag can be used to specify one or more files or
653# directories that contain image that are included in the documentation (see
654# the \image command).
655
656IMAGE_PATH             =
657
658# The INPUT_FILTER tag can be used to specify a program that doxygen should
659# invoke to filter for each input file. Doxygen will invoke the filter program
660# by executing (via popen()) the command <filter> <input-file>, where <filter>
661# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
662# input file. Doxygen will then use the output that the filter program writes
663# to standard output.
664# If FILTER_PATTERNS is specified, this tag will be
665# ignored.
666
667INPUT_FILTER           =
668
669# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
670# basis.
671# Doxygen will compare the file name with each pattern and apply the
672# filter if there is a match.
673# The filters are a list of the form:
674# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
675# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
676# is applied to all files.
677
678FILTER_PATTERNS        =
679
680# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
681# INPUT_FILTER) will be used to filter the input files when producing source
682# files to browse (i.e. when SOURCE_BROWSER is set to YES).
683
684FILTER_SOURCE_FILES    = NO
685
686#---------------------------------------------------------------------------
687# configuration options related to source browsing
688#---------------------------------------------------------------------------
689
690# If the SOURCE_BROWSER tag is set to YES then a list of source files will
691# be generated. Documented entities will be cross-referenced with these sources.
692# Note: To get rid of all source code in the generated output, make sure also
693# VERBATIM_HEADERS is set to NO.
694
695SOURCE_BROWSER         = YES
696
697# Setting the INLINE_SOURCES tag to YES will include the body
698# of functions and classes directly in the documentation.
699
700INLINE_SOURCES         = YES
701
702# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
703# doxygen to hide any special comment blocks from generated source code
704# fragments. Normal C and C++ comments will always remain visible.
705
706STRIP_CODE_COMMENTS    = NO
707
708# If the REFERENCED_BY_RELATION tag is set to YES
709# then for each documented function all documented
710# functions referencing it will be listed.
711
712REFERENCED_BY_RELATION = YES
713
714# If the REFERENCES_RELATION tag is set to YES
715# then for each documented function all documented entities
716# called/used by that function will be listed.
717
718REFERENCES_RELATION    = YES
719
720# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
721# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
722# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
723# link to the source code.
724# Otherwise they will link to the documentation.
725
726REFERENCES_LINK_SOURCE = YES
727
728# If the USE_HTAGS tag is set to YES then the references to source code
729# will point to the HTML generated by the htags(1) tool instead of doxygen
730# built-in source browser. The htags tool is part of GNU's global source
731# tagging system (see http://www.gnu.org/software/global/global.html). You
732# will need version 4.8.6 or higher.
733
734USE_HTAGS              = NO
735
736# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
737# will generate a verbatim copy of the header file for each class for
738# which an include is specified. Set to NO to disable this.
739
740VERBATIM_HEADERS       = YES
741
742#---------------------------------------------------------------------------
743# configuration options related to the alphabetical class index
744#---------------------------------------------------------------------------
745
746# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
747# of all compounds will be generated. Enable this if the project
748# contains a lot of classes, structs, unions or interfaces.
749
750ALPHABETICAL_INDEX     = YES
751
752# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
753# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
754# in which this list will be split (can be a number in the range [1..20])
755
756COLS_IN_ALPHA_INDEX    = 4
757
758# In case all classes in a project start with a common prefix, all
759# classes will be put under the same header in the alphabetical index.
760# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
761# should be ignored while generating the index headers.
762
763IGNORE_PREFIX          = C
764
765#---------------------------------------------------------------------------
766# configuration options related to the HTML output
767#---------------------------------------------------------------------------
768
769# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
770# generate HTML output.
771
772GENERATE_HTML          = NO
773
774# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
775# If a relative path is entered the value of OUTPUT_DIRECTORY will be
776# put in front of it. If left blank `html' will be used as the default path.
777
778HTML_OUTPUT            = html
779
780# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
781# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
782# doxygen will generate files with .html extension.
783
784HTML_FILE_EXTENSION    = .html
785
786# The HTML_HEADER tag can be used to specify a personal HTML header for
787# each generated HTML page. If it is left blank doxygen will generate a
788# standard header.
789
790HTML_HEADER            =
791
792# The HTML_FOOTER tag can be used to specify a personal HTML footer for
793# each generated HTML page. If it is left blank doxygen will generate a
794# standard footer.
795
796HTML_FOOTER            =
797
798# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
799# style sheet that is used by each HTML page. It can be used to
800# fine-tune the look of the HTML output. If the tag is left blank doxygen
801# will generate a default style sheet. Note that doxygen will try to copy
802# the style sheet file to the HTML output directory, so don't put your own
803# stylesheet in the HTML output directory as well, or it will be erased!
804
805HTML_STYLESHEET        =
806
807# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
808# files or namespaces will be aligned in HTML using tables. If set to
809# NO a bullet list will be used.
810
811HTML_ALIGN_MEMBERS     = YES
812
813# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
814# documentation will contain sections that can be hidden and shown after the
815# page has loaded. For this to work a browser that supports
816# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
817# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
818
819HTML_DYNAMIC_SECTIONS  = YES
820
821# If the GENERATE_DOCSET tag is set to YES, additional index files
822# will be generated that can be used as input for Apple's Xcode 3
823# integrated development environment, introduced with OSX 10.5 (Leopard).
824# To create a documentation set, doxygen will generate a Makefile in the
825# HTML output directory. Running make will produce the docset in that
826# directory and running "make install" will install the docset in
827# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
828# it at startup.
829# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
830
831GENERATE_DOCSET        = NO
832
833# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
834# feed. A documentation feed provides an umbrella under which multiple
835# documentation sets from a single provider (such as a company or product suite)
836# can be grouped.
837
838DOCSET_FEEDNAME        = "Doxygen generated docs"
839
840# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
841# should uniquely identify the documentation set bundle. This should be a
842# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
843# will append .docset to the name.
844
845DOCSET_BUNDLE_ID       = org.doxygen.Project
846
847# If the GENERATE_HTMLHELP tag is set to YES, additional index files
848# will be generated that can be used as input for tools like the
849# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
850# of the generated HTML documentation.
851
852GENERATE_HTMLHELP      = NO
853
854# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
855# be used to specify the file name of the resulting .chm file. You
856# can add a path in front of the file if the result should not be
857# written to the html output directory.
858
859CHM_FILE               = Singular.chm
860
861# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
862# be used to specify the location (absolute path including file name) of
863# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
864# the HTML help compiler on the generated index.hhp.
865
866HHC_LOCATION           =
867
868# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
869# controls if a separate .chi index file is generated (YES) or that
870# it should be included in the master .chm file (NO).
871
872GENERATE_CHI           = NO
873
874# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
875# is used to encode HtmlHelp index (hhk), content (hhc) and project file
876# content.
877
878CHM_INDEX_ENCODING     =
879
880# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
881# controls whether a binary table of contents is generated (YES) or a
882# normal table of contents (NO) in the .chm file.
883
884BINARY_TOC             = NO
885
886# The TOC_EXPAND flag can be set to YES to add extra items for group members
887# to the contents of the HTML help documentation and to the tree view.
888
889TOC_EXPAND             = NO
890
891# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
892# are set, an additional index file will be generated that can be used as input for
893# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
894# HTML documentation.
895
896GENERATE_QHP           = NO
897
898# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
899# be used to specify the file name of the resulting .qch file.
900# The path specified is relative to the HTML output folder.
901
902QCH_FILE               =
903
904# The QHP_NAMESPACE tag specifies the namespace to use when generating
905# Qt Help Project output. For more information please see
906# http://doc.trolltech.com/qthelpproject.html#namespace
907
908QHP_NAMESPACE          =
909
910# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
911# Qt Help Project output. For more information please see
912# http://doc.trolltech.com/qthelpproject.html#virtual-folders
913
914QHP_VIRTUAL_FOLDER     = doc
915
916# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
917# For more information please see
918# http://doc.trolltech.com/qthelpproject.html#custom-filters
919
920QHP_CUST_FILTER_NAME   =
921
922# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
923# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
924
925QHP_CUST_FILTER_ATTRS  =
926
927# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
928# filter section matches.
929# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
930
931QHP_SECT_FILTER_ATTRS  =
932
933# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
934# be used to specify the location of Qt's qhelpgenerator.
935# If non-empty doxygen will try to run qhelpgenerator on the generated
936# .qhp file.
937
938QHG_LOCATION           =
939
940# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
941# top of each HTML page. The value NO (the default) enables the index and
942# the value YES disables it.
943
944DISABLE_INDEX          = NO
945
946# This tag can be used to set the number of enum values (range [1..20])
947# that doxygen will group on one line in the generated HTML documentation.
948
949ENUM_VALUES_PER_LINE   = 4
950
951# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
952# structure should be generated to display hierarchical information.
953# If the tag value is set to FRAME, a side panel will be generated
954# containing a tree-like index structure (just like the one that
955# is generated for HTML Help). For this to work a browser that supports
956# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
957# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
958# probably better off using the HTML help feature. Other possible values
959# for this tag are: HIERARCHIES, which will generate the Groups, Directories,
960# and Class Hierarchy pages using a tree view instead of an ordered list;
961# ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
962# disables this behavior completely. For backwards compatibility with previous
963# releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
964# respectively.
965
966GENERATE_TREEVIEW      = YES
967
968# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
969# used to set the initial width (in pixels) of the frame in which the tree
970# is shown.
971
972TREEVIEW_WIDTH         = 250
973
974# Use this tag to change the font size of Latex formulas included
975# as images in the HTML documentation. The default is 10. Note that
976# when you change the font size after a successful doxygen run you need
977# to manually remove any form_*.png images from the HTML output directory
978# to force them to be regenerated.
979
980FORMULA_FONTSIZE       = 8
981
982#---------------------------------------------------------------------------
983# configuration options related to the LaTeX output
984#---------------------------------------------------------------------------
985
986# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
987# generate Latex output.
988
989GENERATE_LATEX         = YES
990
991# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
992# If a relative path is entered the value of OUTPUT_DIRECTORY will be
993# put in front of it. If left blank `latex' will be used as the default path.
994
995LATEX_OUTPUT           = latex
996
997# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
998# invoked. If left blank `latex' will be used as the default command name.
999
1000LATEX_CMD_NAME         = latex
1001
1002# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1003# generate index for LaTeX. If left blank `makeindex' will be used as the
1004# default command name.
1005
1006MAKEINDEX_CMD_NAME     = makeindex
1007
1008# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1009# LaTeX documents. This may be useful for small projects and may help to
1010# save some trees in general.
1011
1012COMPACT_LATEX          = YES
1013
1014# The PAPER_TYPE tag can be used to set the paper type that is used
1015# by the printer. Possible values are: a4, a4wide, letter, legal and
1016# executive. If left blank a4wide will be used.
1017
1018PAPER_TYPE             = a4wide
1019
1020# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1021# packages that should be included in the LaTeX output.
1022
1023EXTRA_PACKAGES         =
1024
1025# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1026# the generated latex document. The header should contain everything until
1027# the first chapter. If it is left blank doxygen will generate a
1028# standard header. Notice: only use this tag if you know what you are doing!
1029
1030LATEX_HEADER           =
1031
1032# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1033# is prepared for conversion to pdf (using ps2pdf). The pdf file will
1034# contain links (just like the HTML output) instead of page references
1035# This makes the output suitable for online browsing using a pdf viewer.
1036
1037PDF_HYPERLINKS         = YES
1038
1039# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1040# plain latex in the generated Makefile. Set this option to YES to get a
1041# higher quality PDF documentation.
1042
1043USE_PDFLATEX           = YES
1044
1045# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1046# command to the generated LaTeX files. This will instruct LaTeX to keep
1047# running if errors occur, instead of asking the user for help.
1048# This option is also used when generating formulas in HTML.
1049
1050LATEX_BATCHMODE        = YES
1051
1052# If LATEX_HIDE_INDICES is set to YES then doxygen will not
1053# include the index chapters (such as File Index, Compound Index, etc.)
1054# in the output.
1055
1056LATEX_HIDE_INDICES     = NO
1057
1058# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
1059
1060LATEX_SOURCE_CODE      = NO
1061
1062#---------------------------------------------------------------------------
1063# configuration options related to the RTF output
1064#---------------------------------------------------------------------------
1065
1066# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1067# The RTF output is optimized for Word 97 and may not look very pretty with
1068# other RTF readers or editors.
1069
1070GENERATE_RTF           = NO
1071
1072# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1073# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1074# put in front of it. If left blank `rtf' will be used as the default path.
1075
1076RTF_OUTPUT             = rtf
1077
1078# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1079# RTF documents. This may be useful for small projects and may help to
1080# save some trees in general.
1081
1082COMPACT_RTF            = NO
1083
1084# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1085# will contain hyperlink fields. The RTF file will
1086# contain links (just like the HTML output) instead of page references.
1087# This makes the output suitable for online browsing using WORD or other
1088# programs which support those fields.
1089# Note: wordpad (write) and others do not support links.
1090
1091RTF_HYPERLINKS         = NO
1092
1093# Load stylesheet definitions from file. Syntax is similar to doxygen's
1094# config file, i.e. a series of assignments. You only have to provide
1095# replacements, missing definitions are set to their default value.
1096
1097RTF_STYLESHEET_FILE    =
1098
1099# Set optional variables used in the generation of an rtf document.
1100# Syntax is similar to doxygen's config file.
1101
1102RTF_EXTENSIONS_FILE    =
1103
1104#---------------------------------------------------------------------------
1105# configuration options related to the man page output
1106#---------------------------------------------------------------------------
1107
1108# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1109# generate man pages
1110
1111GENERATE_MAN           = NO
1112
1113# The MAN_OUTPUT tag is used to specify where the man pages will be put.
1114# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1115# put in front of it. If left blank `man' will be used as the default path.
1116
1117MAN_OUTPUT             = man
1118
1119# The MAN_EXTENSION tag determines the extension that is added to
1120# the generated man pages (default is the subroutine's section .3)
1121
1122MAN_EXTENSION          = .3
1123
1124# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1125# then it will generate one additional man file for each entity
1126# documented in the real man page(s). These additional files
1127# only source the real man page, but without them the man command
1128# would be unable to find the correct page. The default is NO.
1129
1130MAN_LINKS              = NO
1131
1132#---------------------------------------------------------------------------
1133# configuration options related to the XML output
1134#---------------------------------------------------------------------------
1135
1136# If the GENERATE_XML tag is set to YES Doxygen will
1137# generate an XML file that captures the structure of
1138# the code including all documentation.
1139
1140GENERATE_XML           = NO
1141
1142# The XML_OUTPUT tag is used to specify where the XML pages will be put.
1143# If a relative path is entered the value of OUTPUT_DIRECTORY will be
1144# put in front of it. If left blank `xml' will be used as the default path.
1145
1146XML_OUTPUT             = xml
1147
1148# The XML_SCHEMA tag can be used to specify an XML schema,
1149# which can be used by a validating XML parser to check the
1150# syntax of the XML files.
1151
1152XML_SCHEMA             =
1153
1154# The XML_DTD tag can be used to specify an XML DTD,
1155# which can be used by a validating XML parser to check the
1156# syntax of the XML files.
1157
1158XML_DTD                =
1159
1160# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1161# dump the program listings (including syntax highlighting
1162# and cross-referencing information) to the XML output. Note that
1163# enabling this will significantly increase the size of the XML output.
1164
1165XML_PROGRAMLISTING     = YES
1166
1167#---------------------------------------------------------------------------
1168# configuration options for the AutoGen Definitions output
1169#---------------------------------------------------------------------------
1170
1171# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1172# generate an AutoGen Definitions (see autogen.sf.net) file
1173# that captures the structure of the code including all
1174# documentation. Note that this feature is still experimental
1175# and incomplete at the moment.
1176
1177GENERATE_AUTOGEN_DEF   = NO
1178
1179#---------------------------------------------------------------------------
1180# configuration options related to the Perl module output
1181#---------------------------------------------------------------------------
1182
1183# If the GENERATE_PERLMOD tag is set to YES Doxygen will
1184# generate a Perl module file that captures the structure of
1185# the code including all documentation. Note that this
1186# feature is still experimental and incomplete at the
1187# moment.
1188
1189GENERATE_PERLMOD       = NO
1190
1191# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1192# the necessary Makefile rules, Perl scripts and LaTeX code to be able
1193# to generate PDF and DVI output from the Perl module output.
1194
1195PERLMOD_LATEX          = NO
1196
1197# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1198# nicely formatted so it can be parsed by a human reader.
1199# This is useful
1200# if you want to understand what is going on.
1201# On the other hand, if this
1202# tag is set to NO the size of the Perl module output will be much smaller
1203# and Perl will parse it just the same.
1204
1205PERLMOD_PRETTY         = YES
1206
1207# The names of the make variables in the generated doxyrules.make file
1208# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1209# This is useful so different doxyrules.make files included by the same
1210# Makefile don't overwrite each other's variables.
1211
1212PERLMOD_MAKEVAR_PREFIX =
1213
1214#---------------------------------------------------------------------------
1215# Configuration options related to the preprocessor   
1216#---------------------------------------------------------------------------
1217
1218# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1219# evaluate all C-preprocessor directives found in the sources and include
1220# files.
1221
1222ENABLE_PREPROCESSING   = YES
1223
1224# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1225# names in the source code. If set to NO (the default) only conditional
1226# compilation will be performed. Macro expansion can be done in a controlled
1227# way by setting EXPAND_ONLY_PREDEF to YES.
1228
1229MACRO_EXPANSION        = NO
1230
1231# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1232# then the macro expansion is limited to the macros specified with the
1233# PREDEFINED and EXPAND_AS_DEFINED tags.
1234
1235EXPAND_ONLY_PREDEF     = NO
1236
1237# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1238# in the INCLUDE_PATH (see below) will be search if a #include is found.
1239
1240SEARCH_INCLUDES        = YES
1241
1242# The INCLUDE_PATH tag can be used to specify one or more directories that
1243# contain include files that are not input files but should be processed by
1244# the preprocessor.
1245
1246INCLUDE_PATH           =
1247
1248# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1249# patterns (like *.h and *.hpp) to filter out the header-files in the
1250# directories. If left blank, the patterns specified with FILE_PATTERNS will
1251# be used.
1252
1253INCLUDE_FILE_PATTERNS  =
1254
1255# The PREDEFINED tag can be used to specify one or more macro names that
1256# are defined before the preprocessor is started (similar to the -D option of
1257# gcc). The argument of the tag is a list of macros of the form: name
1258# or name=definition (no spaces). If the definition and the = are
1259# omitted =1 is assumed. To prevent a macro definition from being
1260# undefined via #undef or recursively expanded use the := operator
1261# instead of the = operator.
1262
1263PREDEFINED             = DOXYGEN_PARSE
1264
1265# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1266# this tag can be used to specify a list of macro names that should be expanded.
1267# The macro definition that is found in the sources will be used.
1268# Use the PREDEFINED tag if you want to use a different macro definition.
1269
1270EXPAND_AS_DEFINED      = HAVE_PLURAL HAVE_RINGS
1271
1272# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1273# doxygen's preprocessor will remove all function-like macros that are alone
1274# on a line, have an all uppercase name, and do not end with a semicolon. Such
1275# function macros are typically used for boiler-plate code, and will confuse
1276# the parser if not removed.
1277
1278SKIP_FUNCTION_MACROS   = NO
1279
1280#---------------------------------------------------------------------------
1281# Configuration::additions related to external references   
1282#---------------------------------------------------------------------------
1283
1284# The TAGFILES option can be used to specify one or more tagfiles.
1285# Optionally an initial location of the external documentation
1286# can be added for each tagfile. The format of a tag file without
1287# this location is as follows:
1288
1289# TAGFILES = file1 file2 ...
1290# Adding location for the tag files is done as follows:
1291
1292# TAGFILES = file1=loc1 "file2 = loc2" ...
1293# where "loc1" and "loc2" can be relative or absolute paths or
1294# URLs. If a location is present for each tag, the installdox tool
1295# does not have to be run to correct the links.
1296# Note that each tag file must have a unique name
1297# (where the name does NOT include the path)
1298# If a tag file is not located in the directory in which doxygen
1299# is run, you must also specify the path to the tagfile here.
1300
1301TAGFILES               =
1302
1303# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1304# a tag file that is based on the input files it reads.
1305
1306GENERATE_TAGFILE       =
1307
1308# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1309# in the class index. If set to NO only the inherited external classes
1310# will be listed.
1311
1312ALLEXTERNALS           = NO
1313
1314# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1315# in the modules index. If set to NO, only the current project's groups will
1316# be listed.
1317
1318EXTERNAL_GROUPS        = YES
1319
1320# The PERL_PATH should be the absolute path and name of the perl script
1321# interpreter (i.e. the result of `which perl').
1322
1323PERL_PATH              = /usr/bin/perl
1324
1325#---------------------------------------------------------------------------
1326# Configuration options related to the dot tool   
1327#---------------------------------------------------------------------------
1328
1329# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1330# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1331# or super classes. Setting the tag to NO turns the diagrams off. Note that
1332# this option is superseded by the HAVE_DOT option below. This is only a
1333# fallback. It is recommended to install and use dot, since it yields more
1334# powerful graphs.
1335
1336CLASS_DIAGRAMS         = NO
1337
1338# You can define message sequence charts within doxygen comments using the \msc
1339# command. Doxygen will then run the mscgen tool (see
1340# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1341# documentation. The MSCGEN_PATH tag allows you to specify the directory where
1342# the mscgen tool resides. If left empty the tool is assumed to be found in the
1343# default search path.
1344
1345MSCGEN_PATH            =
1346
1347# If set to YES, the inheritance and collaboration graphs will hide
1348# inheritance and usage relations if the target is undocumented
1349# or is not a class.
1350
1351HIDE_UNDOC_RELATIONS   = NO
1352
1353# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1354# available from the path. This tool is part of Graphviz, a graph visualization
1355# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1356# have no effect if this option is set to NO (the default)
1357
1358HAVE_DOT               = NO
1359
1360# By default doxygen will write a font called FreeSans.ttf to the output
1361# directory and reference it in all dot files that doxygen generates. This
1362# font does not include all possible unicode characters however, so when you need
1363# these (or just want a differently looking font) you can specify the font name
1364# using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1365# which can be done by putting it in a standard location or by setting the
1366# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1367# containing the font.
1368
1369DOT_FONTNAME           = FreeSans
1370
1371# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1372# The default size is 10pt.
1373
1374DOT_FONTSIZE           = 8
1375
1376# By default doxygen will tell dot to use the output directory to look for the
1377# FreeSans.ttf font (which doxygen will put there itself). If you specify a
1378# different font using DOT_FONTNAME you can set the path where dot
1379# can find it using this tag.
1380
1381DOT_FONTPATH           =
1382
1383# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1384# will generate a graph for each documented class showing the direct and
1385# indirect inheritance relations. Setting this tag to YES will force the
1386# the CLASS_DIAGRAMS tag to NO.
1387
1388CLASS_GRAPH            = NO
1389
1390# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1391# will generate a graph for each documented class showing the direct and
1392# indirect implementation dependencies (inheritance, containment, and
1393# class references variables) of the class with other documented classes.
1394
1395COLLABORATION_GRAPH    = NO
1396
1397# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1398# will generate a graph for groups, showing the direct groups dependencies
1399
1400GROUP_GRAPHS           = NO
1401
1402# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1403# collaboration diagrams in a style similar to the OMG's Unified Modeling
1404# Language.
1405
1406UML_LOOK               = NO
1407
1408# If set to YES, the inheritance and collaboration graphs will show the
1409# relations between templates and their instances.
1410
1411TEMPLATE_RELATIONS     = NO
1412
1413# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1414# tags are set to YES then doxygen will generate a graph for each documented
1415# file showing the direct and indirect include dependencies of the file with
1416# other documented files.
1417
1418INCLUDE_GRAPH          = NO
1419
1420# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1421# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1422# documented header file showing the documented files that directly or
1423# indirectly include this file.
1424
1425INCLUDED_BY_GRAPH      = NO
1426
1427# If the CALL_GRAPH and HAVE_DOT options are set to YES then
1428# doxygen will generate a call dependency graph for every global function
1429# or class method. Note that enabling this option will significantly increase
1430# the time of a run. So in most cases it will be better to enable call graphs
1431# for selected functions only using the \callgraph command.
1432
1433CALL_GRAPH             = NO
1434
1435# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1436# doxygen will generate a caller dependency graph for every global function
1437# or class method. Note that enabling this option will significantly increase
1438# the time of a run. So in most cases it will be better to enable caller
1439# graphs for selected functions only using the \callergraph command.
1440
1441CALLER_GRAPH           = NO
1442
1443# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1444# will graphical hierarchy of all classes instead of a textual one.
1445
1446GRAPHICAL_HIERARCHY    = NO
1447
1448# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1449# then doxygen will show the dependencies a directory has on other directories
1450# in a graphical way. The dependency relations are determined by the #include
1451# relations between the files in the directories.
1452
1453DIRECTORY_GRAPH        = YES
1454
1455# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1456# generated by dot. Possible values are png, jpg, or gif
1457# If left blank png will be used.
1458
1459DOT_IMAGE_FORMAT       = png
1460
1461# The tag DOT_PATH can be used to specify the path where the dot tool can be
1462# found. If left blank, it is assumed the dot tool can be found in the path.
1463
1464DOT_PATH               =
1465
1466# The DOTFILE_DIRS tag can be used to specify one or more directories that
1467# contain dot files that are included in the documentation (see the
1468# \dotfile command).
1469
1470DOTFILE_DIRS           =
1471
1472# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1473# nodes that will be shown in the graph. If the number of nodes in a graph
1474# becomes larger than this value, doxygen will truncate the graph, which is
1475# visualized by representing a node as a red box. Note that doxygen if the
1476# number of direct children of the root node in a graph is already larger than
1477# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1478# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1479
1480DOT_GRAPH_MAX_NODES    = 70
1481
1482# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1483# graphs generated by dot. A depth value of 3 means that only nodes reachable
1484# from the root by following a path via at most 3 edges will be shown. Nodes
1485# that lay further from the root node will be omitted. Note that setting this
1486# option to 1 or 2 may greatly reduce the computation time needed for large
1487# code bases. Also note that the size of a graph can be further restricted by
1488# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1489
1490MAX_DOT_GRAPH_DEPTH    = 20
1491
1492# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1493# background. This is disabled by default, because dot on Windows does not
1494# seem to support this out of the box. Warning: Depending on the platform used,
1495# enabling this option may lead to badly anti-aliased labels on the edges of
1496# a graph (i.e. they become hard to read).
1497
1498DOT_TRANSPARENT        = YES
1499
1500# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1501# files in one run (i.e. multiple -o and -T options on the command line). This
1502# makes dot run faster, but since only newer versions of dot (>1.8.10)
1503# support this, this feature is disabled by default.
1504
1505DOT_MULTI_TARGETS      = YES
1506
1507# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1508# generate a legend page explaining the meaning of the various boxes and
1509# arrows in the dot generated graphs.
1510
1511GENERATE_LEGEND        = NO
1512
1513# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1514# remove the intermediate dot files that are used to generate
1515# the various graphs.
1516
1517DOT_CLEANUP            = YES
1518
1519#---------------------------------------------------------------------------
1520# Options related to the search engine
1521#---------------------------------------------------------------------------
1522
1523# The SEARCHENGINE tag specifies whether or not a search engine should be
1524# used. If set to NO the values of all tags below this one will be ignored.
1525
1526SEARCHENGINE           = NO
Note: See TracBrowser for help on using the repository browser.